$4,400.00

1/18 Roost 4WD Desert Buggy Brushed RTR, Black/Orange
[ECX01005T1]

1/18 Roost 4WD Desert Buggy Brushed RTR, Black/Orange
Key Features

High-intensity LED Light Bar
Rugged shaft-driven 4WD platform
ECX® 2.4Ghz radio system
Waterproof receiver/ESC combo
Oil filled shocks
Bottom loading battery tray
Includes Dynamite® 6-cell 900mAh NiMH battery and AC charger
Nylon composite chassis
Dynamite® 380 size brushed motor
Uses high-current EC3 connectors
4WD transmission with gear differentials
Four wheel independent suspension
Completely ready-to-run including AA's for transmitter

Needed To Complete

Nothing! Everything you need is in the box!

Video Overview



Overview

Ricochet, rebound and start a riot with the 4WD 1/18-Scale ECX® Roost™ Desert Buggy. This desert dominator comes prepared to stomp out competitors with an unbeatable RTR package and distinctive buggy design that stands out, even while it’s standing up to abuse. The Roost DB features a relentless combination of waterproof electronics and a shaft-driven 4WD drivetrain designed to keep you driving whenever and wherever you decide to hit the pavement. Best of all, the Roost handles just like a real desert buggy and even looks the part thanks to a multi-panel body, high-intensity LED light bar, and oil-filled shocks. Whether you want to sling sand, pulverize pavement or hit maximum air, the 4WD 1/18-Scale ECX® Roost comes ready to take on any and all challenges.

Specs:

Approximate Assembly Time: No assembly required
Ball Bearings: Transmission Only
Batteries: 7.2V, 900mAh stick pack (flat)
Body: SCT, painted
Brakes: Electronic
Bushing Material: Plastic
Charger: NiMH AC wall charger
Chassis: Molded plastic
Completion Level: Ready-To-Run
Differential: Bevel Gear, plastic
Drivetrain: 4WD
Final Drive Ratio: 10.60:1
Front Track: 7.16 in (182mm)
Gear Pitch: 0.5 Module
Ground Clearance: 1.22 in (31mm)
Height: 4.21 in (107mm)
Internal Gear Ratio: 2.47:1
Length: 12.04 in (306mm)
Motor Size: 380
Motor Type: Brushed
Painted or Clear Bodies: Painted
Pinion: 14T
Radio: 2Ch , 2.4GHz
Rear Track: 7.16 in (182mm)
Servos: Included
Shock Type: Oil-filled, Coil Over Springs
Size/Scale: 1/18
Speed Control: Included
Spur Gear: 60T
Suspension: Independent
Tire Diameter: 2.6 in (66mm)
Tire Tread: SCT, All-Terrain
Track: 7.16 in (182mm)
Vehicle Type: Buggy
Weight: 28.0 oz (793g)
Wheel Diameter: 1.38 in (35mm)
Wheel Hex Size: 12mm Hex
Wheel Type: SCT
Wheel Width: 0.90 in (23mm)
Wheelbase: 7.0 in (178mm)
Width: 7.16 in (182mm)

Comentarios
Fabricantes
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Front Suspension Arm (2): 1/10 2WD Circuit, Ruckus, Torment
1 x Spur Gear, 48P 87T: 1/10 2WD All
1 x IMAXRC X150 AC/DC TOUCH SCREEN CHARGER (HVLI COMPATIBLE - 150WDC
1 x Body Clips (8): Circuit, Ruckus, Boost, Barrage
1 x SUPPO A2814-8 1000KV BRUSHLESS OUTRUNNER MOTOR, 4MM SHAFT, 3.5MM
1 x 1/10 Ruckus 2WD Monster Truck Brushed RTR, Orange
1 x 1/10 Ruckus 2WD Monster Truck Brushed RTR, Black/Yellow
1 x SUPPO A2826-5 840KV BRUSHLESS OUTRUNNER MOTOR, 5MM SHAFT, 4MM BU
1 x GAUI BATTERY STRAPS 420MM
2 x UNIVERSAL DOUBLE RC TRANSMITTER CASE
1 x Gens Ace 3000mAh 7.2V Ni-MH Battery with Tamiya Plug
1 x DJI PHANTOM 3 PART 2 PROPELLER GUARD
1 x 1/18 Ruckus 4WD Monster Truck RTR, Black/Red
1 x Gens ace 5000mAh 14.8V 45C 4S1P Lipo Battery Pack with Deans Plu
1 x Slipper Assembly: All ECX 1/10 2WD (ECX1024)
1 x Gens ace 2200mAh 3S 11.1V 25C Lipo Battery Pack with EC3 Plug
1 x Gens ace 2200mAh 11.1V 60C 3S1P Lipo Battery Pack with Deans
1 x Gens ace 2200mAh 11.1V 45C 3S1P Lipo Battery Pack with Deans
1 x Night Radian FT 2.0m BNF Basic with AS3X and SAFE
1 x 1/10 AMP MT 2WD Monster Truck RTR, Black/Green
1 x Gens ace 2200mah 3S 11.1V 25C Lipo Battery Pack with XT60 Plug
1 x Transmission Plastic Gear Set: All ECX 1/10 2WD
1 x 1/10 Torment 2WD SCT Brushed RTR, K&N
1 x 1/18 Ruckus 4WD Monster Truck RTR, Orange/Yellow
1 x 1/10 AMP DB 2WD Desert Buggy RTR, Black/Yellow
1 x Rear Suspension Arm (2): 1/10 2WD Circuit, Ruckus, Torment
1 x 10 x 15 x 4mm Ball Bearings (2)
1 x Opterra 2m Wing BNF Basic with AS3X
1 x Multiplex FunJet Ultra Kit 31"
1 x Turbo Timber 1.5m BNF Basic with AS3X and SAFE Select, includes
1 x HITEC HS-645MG HIGH TORQUE 2BB METAL GEAR SERVO
1 x 20W NiMH AC Battery Charger
1 x SUPPO A2217-09 950KV BRUSHLESS OUTRUNNER MOTOR, 4 MM SHAFT
1 x 1/10 Torment 2WD SCT Brushed RTR, Yellow/Blue
$92,240.00
Información del Fabricante
Otros productos
Compartir Producto
Compartir vía Correo Electrónico
Compartir con Facebook Compartir con Twitter